M.A. Ford
M.A. Ford HPDCR 1060A Twister HPD Coolant Drill 5X 10.60mm
A 10.60 mm diameter coolant-fed drill bit designed for high-performance drilling applications
- Twister HPD design enables high-performance coolant drilling
- 60 mm diameter suits precise hole-making tasks
- 5X coolant capability supports extended drilling cycles
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 notice included for safety awareness
10.60 mm HPD coolant drill
The M.A. Ford HPDCR 1060A Twister is a 5X diameter coolant-fed drill designed for high-performance drilling applications. It targets machinists and fabricators who require precise deep-hole capability in a single pass. The tool suits production environments where coolant delivery through the tool body improves chip evacuation and hole quality. This drill addresses the need for efficient drilling at 10.60 mm diameter.
Sustained load behaviour
Under continuous operation the internal coolant channels maintain consistent fluid delivery to the cutting zone, stabilising temperatures during extended cuts. This design reduces thermal buildup at the cutting edges compared with external flood cooling alone. The 5X length-to-diameter ratio supports deeper holes without peck cycles, maintaining straighter holes over the full depth. Operators experience less tool deflection when running at recommended parameters.
Coolant interface limits
The drill shank fits standard holders compatible with through-spindle coolant systems rated for typical machining centre pressures. Effective chip evacuation depends on the machine pump delivering sufficient flow volume through the 10.60 mm tool body. Insufficient coolant pressure will limit achievable depth and may compromise hole finish in sticky materials. The tool does not suit dry machining or minimum-quantity lubrication setups.
Highlights
- Twister HPD design enables high-performance coolant drilling
- 60 mm diameter suits precise hole-making tasks
- 5X coolant capability supports extended drilling cycles
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 notice included for safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 10.60 mm Twister HPD coolant drill run hot or draw heavy power during extended use?
The drill uses coolant-through channels to manage heat, so it stays cooler and draws consistent power during long drilling cycles.
What tool holder or machine spindle is required to run the 1060A 10.60 mm drill?
It needs a compatible coolant-through holder or spindle that accepts the 10.60 mm shank and delivers high-pressure coolant.
Will the 1060A 10.60 mm drill work in an older CNC without through-spindle coolant?
It can run with external flood coolant, but the internal coolant passages will not be used, reducing chip evacuation performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
