M.A. Ford
M.A. Ford HPDCR 1050A Twister HPD Coolant Drill 10.50 mm
A 10.50 mm Twister HPD coolant drill designed for high-performance drilling applications
- 50 mm diameter matches precise drilling needs
- 5x coolant-fed design clears chips efficiently
- Twister HPD geometry cuts hard materials cleanly
- M.A. Ford engineering delivers reliable performance
- California Proposition 65 warnings noted for safety
M.A. Ford HPDCR 1050A Twister Drill
This M.A. Ford Twister HPD coolant drill is a high-performance cutting tool designed for precision holemaking. It features a 10.50 mm diameter and a 5X diameter drilling depth capability. The tool is engineered for high productivity in demanding machining applications. It arrives in new condition ready for immediate use.
Suited for deep-hole drilling in metal
Machinists requiring a rigid, coolant-fed drill for depths up to five times the diameter will benefit from this design. The 10.50 mm size addresses a specific hole requirement in production runs. Shops needing different diameters or non-coolant drills should select an alternative tool. Buyers who want more size options must look at other listings.
10.50 mm diameter with 5X depth capability
The 10.50 mm cutting diameter determines the hole size this drill produces. Its 5X diameter length ratio defines the maximum drilling depth achievable in a single pass. This specification decides if the tool matches the required hole geometry. Verify the diameter and depth ratio against your machining drawing before ordering.
Highlights
- 50 mm diameter matches precise drilling needs
- 5x coolant-fed design clears chips efficiently
- Twister HPD geometry cuts hard materials cleanly
- M.A. Ford engineering delivers reliable performance
- California Proposition 65 warnings noted for safety
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 10.50 mm coolant drill in a 5X holder, and what step is often missed?
Secure the shank fully in the holder, align the coolant ports, then torque the clamp — skipping the port alignment blocks flow.
What maintenance does the Twister HPD drill need after extended use?
Inspect the cutting edges for wear, clean the internal coolant channels, and replace the drill when diameter drops below tolerance.
What limit appears first during sustained drilling with the 1050A?
Heat buildup in the cutting zone reduces edge life before the coolant system reaches its pressure ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
