M.A. Ford
M.A. Ford HPDCR 1030A Twister HPD coolant drill 10.30 mm
Twister HPD coolant drill with 10.30 mm diameter for high-performance drilling
- Precision drilling with 10.30 mm diameter
- Coolant-through design for efficient chip evacuation
- 5X diameter capability for deeper holes
- M.A. Ford quality for reliable performance
- California Prop 65 chemical warning applies
Precision Coolant Drill
The M.A. Ford HPDCR 1030A Twister HPD is a 10.30 mm high-performance coolant drill designed for demanding drilling operations. It targets machinists and fabricators who require accurate hole-making with integrated coolant delivery. This tool suits professionals working on CNC machines or rigid manual setups where chip evacuation and heat control are critical.
Solid Carbide Construction
The drill body is built from solid carbide to maintain rigidity and resist wear during high-speed passes. Its 5X diameter flute length supports deeper holes without peck cycles, while the through-coolant channels feed fluid directly to the cutting edges. The cylindrical shank fits standard hydraulic or shrink-fit holders, so no special adapters are required for typical workshop spindles.
California Proposition 65 Notice
The product carries a Proposition 65 warning for chemicals known to the State of California to cause cancer and reproductive harm. Users should follow shop safety protocols, including ventilation and personal protective equipment, when machining with this drill. No additional accessories, coatings or software are bundled with the tool.
Highlights
- Precision drilling with 10.30 mm diameter
- Coolant-through design for efficient chip evacuation
- 5X diameter capability for deeper holes
- M.A. Ford quality for reliable performance
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What coolant standard does the Twister HPD 10.30 mm drill support?
The Twister HPDCR 1030A is designed for high-performance coolant-through drilling, delivering lubricant directly to the cutting zone for improved chip evacuation and tool life.
What shank size does the 10.30 mm Twister HPD drill require for mounting?
The 10.30 mm diameter drill uses a matching 10.30 mm straight shank, so it fits directly into a collet or chuck sized for 10.30 mm without a reducer sleeve.
How is the Twister HPDCR 1030A installed in a CNC machine, and what step is often missed?
Load the drill into a precision collet, torque to the holder specification, then verify coolant flows through the internal channels before starting the 5×D cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
