M.A. Ford
M.A. Ford HPDCR 0930A Twister HPD Coolant Drill 5X 9.30 mm
A 9.30 mm coolant-fed drill bit designed for high-performance drilling applications
- 30 mm diameter drills precise holes
- 5× coolant-fed design improves chip evacuation
- HPD Twister geometry extends tool life
- M.A. Ford brand ensures industrial quality
- California Proposition 65 warning included for safety compliance
9.30 mm Twister HPD Coolant Drill
The M.A. Ford HPDCR 0930A is a 9.30 mm Twister HPD coolant drill built for high-performance drilling. It is designed for professional machinists who need reliable hole-making with through-coolant delivery. The 5X designation indicates its length-to-diameter ratio for deeper drilling applications. This tool suits users who require precision in demanding materials.
For deep-hole drilling with coolant
This drill suits operators running CNC machines with through-spindle coolant capability who need to reach 5X diameter depth in a single pass. It is not for manual drilling or machines without coolant feed. Buyers who need a shorter drill for shallow holes or a different diameter should look at other options. The 9.30 mm size is fixed and cannot be adjusted.
5X length-to-diameter ratio
The 5X ratio is the critical specification that determines reach and chip evacuation capacity. It means the flute length allows drilling up to five times the 9.30 mm diameter. Select this drill only when the application requires this specific depth capability. Using it outside this parameter reduces performance and tool life.
Highlights
- 30 mm diameter drills precise holes
- 5× coolant-fed design improves chip evacuation
- HPD Twister geometry extends tool life
- M.A. Ford brand ensures industrial quality
- California Proposition 65 warning included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 9.30 mm Twister HPD drill before chips need clearing?
The 5X designation indicates a flute length suited for holes up to five times the 9.30 mm diameter in a single pass.
Does the coolant-fed design reduce heat during extended drilling?
Internal coolant channels deliver fluid to the cutting zone, lowering temperature and helping maintain edge life in long runs.
What machine spindle is required for the HPDCR 0930A?
A holder that accepts a 9.30 mm shank with through-coolant capability is needed to use the drill as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
