M.A. Ford
M.A. Ford HPDCR 0860A Twister HPD Coolant Drill 5X 8.60 mm
An 8.60 mm diameter coolant-fed drill bit designed for high-performance drilling applications
- Twister HPD design delivers high-performance coolant drilling
- 5X diameter capability enables deep-hole precision
- 60 mm diameter suits exact machining requirements
- M.A. Ford brand backs professional-grade tool quality
- New condition ensures full factory performance from start
Purpose & User
The M.A. Ford HPDCR 0860A Twister HPD Coolant Drill is a 5X coolant-fed drill bit engineered for high-performance drilling in demanding materials. It targets machinists and fabricators who require precise, deep holes with efficient chip evacuation. This tool is not suited for buyers who need a standard twist drill without through-coolant capability.
Critical Specification
The defining specification is the 8.60 mm cutting diameter combined with a 5X diameter drilling depth. This single figure determines whether the bit reaches the required hole depth in a single pass. If the application calls for a different diameter or a shorter or longer length-to-diameter ratio, this specific part will not meet the requirement.
Sustained Operation
Through-coolant delivery maintains consistent temperature and flushes chips from deep holes during extended cycles, reducing the risk of built-up edge and premature wear. The design supports stable performance in production runs where repeated deep-hole accuracy is essential. California Proposition 65 warnings apply regarding chemical exposure.
Highlights
- Twister HPD design delivers high-performance coolant drilling
- 5X diameter capability enables deep-hole precision
- 60 mm diameter suits exact machining requirements
- M.A. Ford brand backs professional-grade tool quality
- New condition ensures full factory performance from start
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 8.60 mm diameter mean for the hole I will get?
The drill produces a nominal 8.60 mm hole, suitable for standard metric tap sizes or clearance fits in steel and cast iron.
What does the coolant-through design require from my machine?
The tool has internal coolant passages that need a spindle or holder capable of delivering high-pressure coolant through the shank.
What shank style does this 5X drill use for mounting?
It uses a straight cylindrical shank designed for standard hydraulic, shrink-fit or collet holders in CNC machining centres.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
