M.A. Ford
M.A. Ford HPDCR 0760A Twister HPD Coolant Drill 5X 7.60 mm
A 7.60 mm coolant-fed drill designed for high-performance drilling applications
- Twister HPD design enables coolant-through drilling for efficient chip evacuation
- 60 mm diameter suits precise hole-making in metal and composite materials
- 5X flute length provides extended reach for deep-hole applications
- M.A. Ford manufacturing ensures consistent geometry and reliable performance
- California Proposition 65 notice included for chemical safety awareness
M.A. Ford Twister HPD Coolant Drill
This M.A. Ford Twister HPD coolant drill is a 5X high-performance tool built for precise hole-making. It targets metalworking professionals who need reliable coolant-fed drilling in production environments. The 7.60 mm diameter suits specific machining operations requiring this exact size.
Who this suits and who should look elsewhere
Machinists running high-pressure coolant systems gain consistent chip evacuation and longer tool life with this 5X drill. Buyers who need a different diameter or a non-coolant drill should look elsewhere because this model is fixed at 7.60 mm and requires coolant feed.
Critical specification: 7.60 mm diameter
The 7.60 mm cutting diameter is the single specification that decides fit for your application. Verify this exact size matches the hole requirement before purchase. A Proposition 65 warning applies as the product contains chemicals known to the State of California to cause cancer and reproductive harm.
Highlights
- Twister HPD design enables coolant-through drilling for efficient chip evacuation
- 60 mm diameter suits precise hole-making in metal and composite materials
- 5X flute length provides extended reach for deep-hole applications
- M.A. Ford manufacturing ensures consistent geometry and reliable performance
- California Proposition 65 notice included for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size drill chuck is needed for the 7.60 mm shank?
The drill has a 7.60 mm diameter shank, so a chuck that accepts at least 8 mm or a 3/8 inch capacity is required for secure clamping.
Can this coolant-fed drill be used with a standard drill press without through-spindle coolant?
The Twister HPD design uses internal coolant channels; without through-spindle delivery the coolant holes cannot be supplied, so external flood coolant must be used instead.
How can I confirm the drill is cutting correctly after installation?
Check for consistent chip formation, steady feed force, and hole diameter within tolerance; the 5X length should produce straight holes without excessive wander when coolant flows properly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
