M.A. Ford
M.A. Ford HPDCR 0710A Twister HPD Coolant Drill 7.10 mm
7.10 mm coolant-fed drill delivers high-performance drilling with internal coolant supply
- Twister HPD design enables high-performance coolant drilling
- 5X drilling capability improves efficiency in tough materials
- 10 mm diameter suits precise hole-making tasks
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
Application focus
The M.A. Ford HPDCR 0710A Twister HPD Coolant Drill is a 7.10 mm high-performance drill designed for coolant-fed drilling operations. It targets machine shops and maintenance teams that require precise hole-making in demanding materials where through-tool coolant delivery improves chip evacuation and tool life.
Sustained load behaviour
Through-coolant channels deliver lubricant directly to the cutting zone, stabilising temperatures during extended drilling cycles. The 5× diameter capability supports deeper holes without peck cycles, reducing cycle time and maintaining consistent hole quality when running at recommended feeds and speeds for the workpiece material.
Installation notes
The drill fits standard coolant-enabled tool holders that accept a 7.10 mm shank; verify holder compatibility and coolant pressure ratings before use. California Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm, so follow shop safety procedures for handling and disposal.
Highlights
- Twister HPD design enables high-performance coolant drilling
- 5X drilling capability improves efficiency in tough materials
- 10 mm diameter suits precise hole-making tasks
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 7.10 mm Twister HPD drill generate noticeable heat or noise during continuous drilling?
The solid-carbide Twister HPD design runs cooler than standard drills because coolant flows through the 7.10 mm body, and the flute geometry reduces vibration that causes noise.
What tool holder or machine spindle is required to run this 5×D coolant drill?
A rigid CNC machining centre or lathe with through-spindle coolant capability and a precision collet or hydraulic chuck that accepts a 7.10 mm shank is needed.
Can the 7.10 mm HPDCR drill be used in an older manual drill press without through-coolant?
No — the drill is engineered for high-pressure through-coolant systems; running it on a manual press without coolant will cause premature wear and possible breakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
