M.A. Ford
M.A. Ford HPDCR 0560A Twister HPD Coolant Drill 5X 5.60mm
A 5.60 mm high-performance coolant drill designed for 5X drilling operations
- 5x drilling depth for faster through-holes
- 60 mm diameter fits precise hole specs
- Coolant-through design clears chips efficiently
- High-performance carbide resists wear longer
- California Prop 65 chemical warning applies
5.60 mm HPD Coolant Drill
The M.A. Ford HPDCR 0560A Twister is a 5X diameter coolant-fed drill built for high-performance drilling in demanding materials. Its 5.60 mm cutting diameter and through-coolant design deliver consistent chip evacuation and temperature control in production environments.
CNC shops running deep-hole cycles
Machinists who need reliable 5X depth capability with internal coolant supply will match this tool to rigid CNC setups. Operations without through-spindle coolant or those limited to 3X tooling should evaluate alternatives that fit their machine configuration.
5X diameter-to-depth ratio
The defining specification is the 5X length-to-diameter ratio, which determines whether this drill reaches the required hole depth without pecking cycles or tool changes.
Highlights
- 5x drilling depth for faster through-holes
- 60 mm diameter fits precise hole specs
- Coolant-through design clears chips efficiently
- High-performance carbide resists wear longer
- California Prop 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 5.60 mm Twister HPD coolant drill require in the tool holder?
The drill has a 5.60 mm cutting diameter and is designed for a matching 5.60 mm shank to fit standard precision collets or hydraulic holders.
How is the coolant delivered through the Twister HPD drill during installation, and what step is often missed?
Coolant flows through internal channels to the tip; the step often missed is verifying that the machine’s through-spindle coolant is activated and pressure is set before starting the cycle.
When should the 5.60 mm Twister HPD coolant drill be replaced based on wear?
Replace the drill when flank wear reaches the manufacturer’s limit for 5.60 mm tools or when hole diameter exceeds tolerance, typically after the rated tool life in the target material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
