M.A. Ford
M.A. Ford HPDCR 0520A Twister HPD Coolant Drill 5X 5.20 mm
A Twister HPD coolant drill with 5× diameter flute length for 5.20 mm holes
- 5× drilling depth in a single pass
- 20 mm diameter suits precise hole sizes
- Twister HPD design improves coolant flow
- M.A. Ford quality for professional use
- California Prop 65 warning applies
Twister HPD Coolant Drill 5X
The M.A. Ford HPDCR 0520A is a Twister HPD coolant drill designed for high-performance drilling tasks. It features a 5.20 mm diameter and a 5X configuration. This new power tool is intended for professional users who require precise hole-making in demanding materials.
Coolant-through capability
The drill incorporates internal coolant channels that deliver fluid directly to the cutting zone. This design improves chip evacuation and thermal management during deep-hole operations. The feature reduces cycle time and extends tool life compared to external cooling methods alone.
Check machine compatibility
Verify that your machine spindle accepts the drill's shank configuration and can supply coolant at the required pressure. Ensure the workpiece material and thickness suit a 5.20 mm diameter tool with 5X depth capability. Review the Proposition 65 warning regarding chemical exposure before use.
Highlights
- 5× drilling depth in a single pass
- 20 mm diameter suits precise hole sizes
- Twister HPD design improves coolant flow
- M.A. Ford quality for professional use
- California Prop 65 warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 5.20 mm coolant drill bit need resharpening or replacement?
Resharpening interval depends on the workpiece material and feed rate; monitor flank wear and replace when the cutting edges no longer produce clean holes.
What limit appears first during continuous drilling with the 5X HPD drill?
Chip evacuation and heat buildup in the flute area typically become the limiting factors before the tool itself reaches a structural limit.
How much heat and noise does the 5.20 mm HPDCR drill generate in all-day production?
Expect elevated spindle temperatures and noticeable cutting noise; use the internal coolant channels and proper speeds to manage both.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
