M.A. Ford
M.A. Ford HPDCR 0430A Twister HPD coolant drill 4.30 mm
A 4.30 mm high-performance coolant drill designed for efficient drilling operations
- 30 mm diameter drills precise holes in metal
- 5× coolant-fed design clears chips and reduces heat
- Twister HPD geometry improves cutting speed and tool life
- M.A. Ford manufacturing delivers consistent high-performance results
- New condition ensures full factory specification out of the box
What this drill is
The M.A. Ford HPDCR 0430A Twister HPD coolant drill is a 4.30 mm high-performance drill designed for precision hole-making. It targets machinists and engineers who need reliable coolant-fed drilling in demanding materials. The 5X length provides extended reach for deeper holes. This new tool arrives ready for immediate use in professional workshops.
Capacity and headroom
The 4.30 mm diameter suits applications requiring this specific hole size across a range of metals. Its coolant-through design delivers lubricant directly to the cutting zone, improving chip evacuation and tool life at higher speeds. The 5X length-to-diameter ratio handles moderate depths efficiently. Extremely deep holes beyond this ratio may require a different tool length.
Build integration
A machine spindle with through-coolant capability is required to use the internal coolant feature. The drill uses a standard shank compatible with common tool holders and collets. No proprietary holders or special adaptors are needed. Ensure the workpiece setup provides adequate rigidity for the 5X length to maintain accuracy and prevent deflection.
Highlights
- 30 mm diameter drills precise holes in metal
- 5× coolant-fed design clears chips and reduces heat
- Twister HPD geometry improves cutting speed and tool life
- M.A. Ford manufacturing delivers consistent high-performance results
- New condition ensures full factory specification out of the box
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 4.30 mm HPDCR 0430A fit my existing drill chuck?
The 4.30 mm shank matches standard metric chuck capacities, so it installs directly without adapters.
How do I verify the Twister HPD drill is delivering coolant correctly after installation?
Run the spindle at low speed and confirm a steady stream exits the through-coolant holes at the tip.
Does the HPDCR 0430A come with any accessories or must I supply cutting fluid separately?
The box contains only the 4.30 mm drill; cutting fluid and tool holders are purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
