M.A. Ford
M.A. Ford Cyclone XD 8X Coolant-Fed Double Margin Drill 9.30 mm
Coolant-fed double-margin drill cuts 9.30 mm holes at 8× diameter depth
- 30 mm diameter drills precise holes
- Coolant-fed design removes heat during deep cuts
- Double margin construction improves hole straightness
- Cyclone XD geometry extends tool life
- 8X performance rating supports demanding applications
What the drill is and who it suits
The M.A. Ford Cyclone XD is a 9.30 mm diameter coolant-fed double margin drill designed for production drilling where through-tool coolant delivery and hole straightness matter. It targets CNC operators and job-shop machinists who need reliable deep-hole performance in steel, stainless or cast iron.
Installation and common issues
The shank fits standard tool holders matching the drill diameter so no special adapters are required. Coolant must be routed through the machine spindle and holder at sufficient pressure to reach the cutting zone; inadequate flow or misaligned holders are the usual causes of premature wear or hole wandering.
Checks before ordering
Verify that your machine spindle and tool holder can supply through-spindle coolant at the pressure your process demands. Confirm the 9.30 mm diameter matches the hole size required by the drawing and that the workpiece material is within the drill’s recommended application range.
Highlights
- 30 mm diameter drills precise holes
- Coolant-fed design removes heat during deep cuts
- Double margin construction improves hole straightness
- Cyclone XD geometry extends tool life
- 8X performance rating supports demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I verify the 9.30 mm Cyclone XD 8X drill is cutting correctly after setup?
Check for consistent chip evacuation through the coolant-fed channels and measure the finished hole diameter against the 9.30 mm specification using a calibrated gauge.
What comes with the CXDCLM0930AP drill and what must I supply separately?
The package includes the double-margin drill bit only; you must provide a compatible coolant-fed tool holder, coolant supply system and a machine spindle capable of the required run-out tolerance.
Which Cyclone XD 8X version should I choose for a 9.30 mm hole?
Select the CXDCLM0930AP model, which is manufactured specifically for a 9.30 mm diameter; other listed variants correspond to different diameters and will not produce the correct hole size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
