M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 8.90 mm
Coolant-fed double-margin drill with 8x diameter reach for 8.90 mm holes
- 8x diameter drilling depth reaches deep holes
- Coolant-fed design removes chips and reduces heat
- Double margin construction improves hole straightness and finish
- 90 mm diameter suits precise metric applications
- California Proposition 65 warning indicates regulated chemical content
8.90 mm Cyclone Xd Drill
The M.A. Ford Cyclone Xd is an 8X coolant fed double margin drill with an 8.90 mm diameter. It is a new cutting tool designed for precision holemaking in industrial applications. The coolant fed design delivers fluid directly to the cutting zone for effective chip evacuation and temperature control. Double margins provide improved hole straightness and surface finish.
Suited for deep-hole precision work
Machinists drilling deep, accurate holes in tough materials will benefit from the 8X length and through coolant capability. The double margin geometry supports stability during extended drilling cycles. Workshops without high pressure coolant systems or those needing shorter drill lengths should consider other tooling options.
8X diameter drilling depth
The 8X designation indicates this drill reaches a depth of eight times its 8.90 mm diameter. This single specification determines whether the tool can complete the required hole depth in one pass without pecking. Verify the machine spindle and coolant pressure can support this length to diameter ratio before selection.
Highlights
- 8x diameter drilling depth reaches deep holes
- Coolant-fed design removes chips and reduces heat
- Double margin construction improves hole straightness and finish
- 90 mm diameter suits precise metric applications
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 8.90 mm coolant-fed drill in my CNC spindle?
Mount the straight shank securely in a precision collet or hydraulic holder; the step operators miss is verifying coolant-port alignment so fluid reaches the double-margin lands without leakage.
What maintenance or replacement will the CXDCLM0890AP need later?
Inspect the double-margin lands after each job; regrind or replace the 8.90 mm drill once corner wear reaches the margin width to maintain hole straightness.
What limit appears first during sustained high-feed drilling?
The double-margin design pushes heat into the coolant stream, so the practical ceiling is coolant pressure and volume — if flow drops, margin temperatures spike and tool life falls sharply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
