M.A. Ford
M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill 7.90 mm
Coolant-fed double-margin drill with 8× diameter reach, 7.90 mm diameter
- 8× diameter reach for deep-hole drilling
- Coolant-fed design evacuates chips efficiently
- Double-margin construction improves hole accuracy
- 90 mm cutting diameter matches precise specs
- California Proposition 65 chemical warning applies
M.A. Ford Cyclone XD 8X Drill 7.90 mm
The M.A. Ford Cyclone XD is a coolant-fed double margin drill with an 8X diameter-to-length ratio. It is manufactured for precision hole-making in demanding materials where straightness and finish are critical. The 7.90 mm diameter suits metric tooling requirements in professional workshops.
Sustained load performance with coolant feed
Continuous coolant delivery through the tool reduces heat buildup during deep-hole drilling cycles. The double margin design maintains alignment over the full 8X depth, limiting deviation when the drill is engaged for extended periods. Chip evacuation remains consistent because the coolant flushes the flutes without interruption.
Check machine and holder compatibility before
Verify that your machine spindle provides through-coolant capability at the pressure required for 8X depth drilling. Confirm the tool holder accepts a 7.90 mm shank with the correct tolerance for double margin guidance. Ensure workpiece clamping resists the thrust forces generated at this length-to-diameter ratio.
Highlights
- 8× diameter reach for deep-hole drilling
- Coolant-fed design evacuates chips efficiently
- Double-margin construction improves hole accuracy
- 90 mm cutting diameter matches precise specs
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 7.90 mm Cyclone XD drill generate during extended drilling sessions?
The double-margin design and internal coolant channels keep cutting temperatures low, reducing thermal expansion and maintaining hole accuracy over long runs.
What machine setup is required to use the coolant-fed feature on this 7.90 mm drill?
A CNC or milling centre with through-spindle coolant capability and a compatible 7.90 mm tool holder is needed to deliver fluid through the drill body.
Will the 7.90 mm Cyclone XD fit in the same tool holders as my existing 8 mm drills?
The 7.90 mm shank is undersized for standard 8 mm collets; use a dedicated 7.90 mm or 8 mm reducer sleeve for secure clamping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
