M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 7.40mm
Coolant-fed double-margin drill with 7.40 mm diameter for deep-hole precision
- Coolant-fed design evacuates heat for longer tool life
- 8x diameter drilling depth reaches deep holes efficiently
- Double-margin geometry improves hole straightness and finish
- 40 mm diameter suits precise metric applications
- California Proposition 65 warning informs safe handling practices
Precision drilling tool
The M.A. Ford Cyclone Xd is a 7.40mm solid carbide drill designed for high-performance holemaking. It targets machinists and manufacturers who require accurate deep-hole capability in tough materials. The 8x diameter flute length supports extended reach without pecking cycles.
Coolant-fed double-margin design
Internal coolant channels deliver fluid directly to the cutting zone for heat control and chip evacuation. Two margins guide the drill to maintain straightness and improve surface finish. This geometry reduces walk and supports consistent diameter tolerance in deep holes.
Prop 65 chemical warning applies
The product contains substances identified by California as carcinogenic and reproductive toxins. Users must follow workplace safety regulations for handling and ventilation. No other regulatory certifications or material specifications are disclosed in the supplied data.
Highlights
- Coolant-fed design evacuates heat for longer tool life
- 8x diameter drilling depth reaches deep holes efficiently
- Double-margin geometry improves hole straightness and finish
- 40 mm diameter suits precise metric applications
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
When will the double-margin edges on the 7.40mm Cyclone Xd need resharpening?
Resharpen the double-margin edges when flank wear reaches the manufacturer's recommended limit for this drill series.
What limits continuous drilling depth with the 8X coolant-fed design?
The 8X diameter-to-length ratio sets the maximum hole depth before chip evacuation becomes the limiting factor.
How much heat builds up in the 7.40mm drill body during all-day production runs?
Through-tool coolant delivery at the cutting zone controls heat buildup during extended drilling cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
