M.A. Ford
M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill 7/32 5.56mm
Coolant-fed 8×D double-margin drill for deep holes in steel, 7/32 in / 5.56 mm
- 8x diameter reach drills deeper holes
- Coolant-fed design clears chips efficiently
- Double margin construction improves hole accuracy
- 7/32 inch and 5.56 mm dual sizing
- M.A. Ford quality for demanding applications
Cyclone XD 8X Coolant Fed Drill
The M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill is a precision cutting tool designed for professional machining operations. It targets manufacturers and machinists who require reliable holemaking in demanding materials. The coolant fed design supports efficient chip evacuation during deep drilling cycles. This new drill arrives ready for immediate use in compatible toolholders.
Double Margin Design and Coolant Feed
The double margin configuration provides enhanced hole straightness and surface finish by guiding the drill at two distinct lands. Internal coolant channels deliver fluid directly to the cutting zone, reducing heat buildup and extending tool life in tough alloys. This build quality suits high volume production environments where consistency matters. The shank fits standard holders for the given diameter.
7/32 Inch and 5.56mm Diameter
The drill cuts a nominal diameter of 7/32 inch, which corresponds to 5.56mm metric sizing. This specific dimension determines whether the tool matches the required hole specification for the job. Verify the exact diameter tolerance needed before selecting this part. Buyers needing a different hole size must choose another drill.
Highlights
- 8x diameter reach drills deeper holes
- Coolant-fed design clears chips efficiently
- Double margin construction improves hole accuracy
- 7/32 inch and 5.56 mm dual sizing
- M.A. Ford quality for demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How does the 8X coolant-fed design affect drilling depth capability?
The 8X coolant-fed system delivers coolant directly to the cutting zone, enabling deeper holes with consistent chip evacuation and reduced heat buildup in the workpiece.
What shank dimensions are required to mount the 7/32 inch diameter drill in a holder?
The 7/32 inch (5.56mm) cutting diameter requires a matching collet or chuck capacity; ensure your tool holder accepts this exact shank size for secure clamping.
What is the correct procedure for installing the double margin drill to avoid runout?
Clean the holder and shank thoroughly, insert the drill fully until the shank seats against the stop, then tighten the collet evenly in a star pattern to eliminate runout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
