M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 7.30mm
Coolant-fed double-margin drill with 7.30 mm diameter for 8×D deep-hole drilling
- 8× diameter drill depth for efficient deep-hole drilling
- Coolant-fed design improves chip evacuation and tool life
- Double margin construction enhances hole accuracy and surface finish
- 30 mm diameter suits precise metric drilling applications
- California Proposition 65 warning for chemical safety awareness
Cyclone Xd 8X Drill for Precision Machining
The M.A. Ford Cyclone Xd 8X is a coolant-fed double margin drill built for high-performance holemaking. Its 7.30 mm diameter suits precise drilling tasks in demanding materials. The tool targets machinists and manufacturers who need reliable chip evacuation and hole accuracy. It arrives new and ships directly from the manufacturer.
Upgrade from Standard Drills for Deep Holes
This drill replaces conventional twist drills when hole depth reaches eight times the diameter. The double margin design improves guidance and surface finish in deep-hole applications. Internal coolant delivery extends tool life and helps maintain diameter consistency. The jump is worth it when standard drills wander or overheat in similar conditions.
Coolant-Fed Limits in Difficult Materials
The coolant-fed interface requires a machine spindle and holder capable of delivering high-pressure fluid. Without that supply, the drill cannot clear chips effectively at 8X depth. The double margins increase friction in sticky or low-carbon alloys, demanding rigid setups. Buyers without through-spindle coolant or stable fixturing should consider alternative tooling.
Highlights
- 8× diameter drill depth for efficient deep-hole drilling
- Coolant-fed design improves chip evacuation and tool life
- Double margin construction enhances hole accuracy and surface finish
- 30 mm diameter suits precise metric drilling applications
- California Proposition 65 warning for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 7.30 mm Cyclone Xd drill require in the tool holder?
The drill has a 7.30 mm cutting diameter, so the holder must accept a 7.30 mm shank for a secure fit.
How do I connect the coolant feed on this double-margin drill, and what step is often missed?
Attach the coolant supply to the drill’s through-tool channel; the step often missed is verifying that the coolant pressure is high enough to reach the 8× depth.
When should the 7.30 mm Cyclone Xd drill be replaced due to margin wear?
Replace the drill when the double margins show measurable wear or chipping, as worn margins reduce hole accuracy and coolant flow at depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
