M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 7.20mm
Coolant-fed double-margin drill with 8× diameter reach for 7.20 mm holes
- 8X diameter capability for deep holes in one pass
- Coolant-fed design clears chips from deep bores
- Double margin construction improves hole straightness
- 20 mm diameter suits precise drilling tasks
- M.A. Ford quality for professional workshop use
Cyclone Xd 8X Coolant-Fed Drill
The M.A. Ford Cyclone Xd is a new solid-carbide drill built for production environments that demand deep, accurate holes with internal coolant delivery. Its double-margin design improves hole straightness and surface finish in tough alloys. Machinists running high-volume jobs will value the rigidity and chip control this geometry provides.
7.20 mm diameter, 8×D depth
This drill cuts to a depth of eight times its 7.20 mm diameter, making the reach the single specification that determines fit for the application. The through-tool coolant channels evacuate chips from deep bores without Peck cycles. Shops needing a different diameter or length-to-diameter ratio must select another part number.
Sustained deep-hole performance
Continuous coolant flow through the flutes stabilises temperature during long cuts, preventing thermal expansion that widens holes. The double margins maintain alignment when the drill is fully engaged, reducing wander over the full 8×D depth. Operators see consistent size and finish from the first hole to the last without mid-run compensation.
Highlights
- 8X diameter capability for deep holes in one pass
- Coolant-fed design clears chips from deep bores
- Double margin construction improves hole straightness
- 20 mm diameter suits precise drilling tasks
- M.A. Ford quality for professional workshop use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How does the 7.20mm diameter perform once the drill is running in a machine?
The 7.20mm cutting diameter produces a precise hole at that exact size when the tool is driven at recommended speeds and feeds.
What shank interface does the Cyclone Xd use and what does it limit?
A straight cylindrical shank fits standard drill holders and collets, limiting use to tooling that accepts round shanks.
What physical clearance is needed for the 8X length and coolant-fed design?
The 8X length-to-diameter ratio requires deep-hole clearance, and the coolant-fed body needs a through-spindle or external coolant connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
