M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 6.20 mm
Coolant-fed double-margin drill cuts 6.20 mm holes with 8× diameter depth capacity
- Coolant-fed design extends tool life in deep holes
- Double-margin geometry improves hole straightness and finish
- 8x diameter reach reduces need for peck drilling
- 20 mm diameter suits precise metric applications
- California Proposition 65 warning informs safe handling
M.A. Ford Cyclone Xd 6.20 mm Drill
The M.A. Ford Cyclone Xd is a coolant-fed double margin drill with a 6.20 mm diameter. It is designed for precision hole-making in demanding machining applications. The tool suits CNC operators and job shops that require accurate deep-hole drilling performance.
Suited for high-precision CNC drilling
This drill suits machinists who need coolant-fed stability and double margin guidance for tight tolerances. It is not for manual drilling operations or handheld tool use. Buyers without through-spindle coolant capability should look at alternative tooling.
6.20 mm diameter defines the hole size
The single specification that decides fit is the 6.20 mm cutting diameter. This exact size determines the finished hole diameter in the workpiece. Verify the required hole size matches this figure before purchasing.
Highlights
- Coolant-fed design extends tool life in deep holes
- Double-margin geometry improves hole straightness and finish
- 8x diameter reach reduces need for peck drilling
- 20 mm diameter suits precise metric applications
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How is the 6.20 mm coolant-fed double-margin drill installed in the machine spindle?
Secure the shank in a compatible holder, align the internal coolant channels with the machine supply, and torque to the holder specification; the step often missed is verifying coolant-seal engagement before starting the cycle.
What maintenance or replacement will the 6.20 mm Cyclone Xd drill need over time?
Monitor the double margins and cutting edges for wear; regrind or replace the drill once margin width or corner breakdown exceeds the tolerance required for hole size and finish.
What limit appears first on the 6.20 mm drill during sustained high-feed drilling?
The coolant-fed design pushes heat into the cutting zone, so the practical limit is usually thermal — margin tempering or coating breakdown — before the tool structure itself yields.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
