M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 6.00mm
A coolant-fed double-margin drill with 8× diameter depth capability for 6.00 mm holes
- Cyclone Xd 8X design enables deep-hole drilling
- Coolant-fed operation clears chips for longer tool life
- Double margin construction improves hole accuracy
- 00 mm diameter suits precise machining tasks
- Brand M.A. Ford signals professional-grade quality
M.A. Ford Cyclone Xd 8X Coolant Fed Drill
This solid-carbide drill targets machinists and production shops that need precise 6.00 mm holes in steel, stainless steel or cast iron. The 8x diameter flute length and through-coolant channels support deep-hole cycles on CNC machining centres and rigid manual mills.
Double-margin design and coolant feed
Two lands guide the tool for straighter holes and tighter tolerances while internal coolant ports flush chips from the bottom of the cut. Together they reduce wander, improve surface finish and extend tool life in high-volume or unattended operations.
Check spindle coolant and holder clearance
Verify that your machine delivers coolant through the spindle at the pressure your process requires and that the tool holder accommodates the drill’s shank and overall length. Confirm the workpiece material matches the geometry before ordering.
Highlights
- Cyclone Xd 8X design enables deep-hole drilling
- Coolant-fed operation clears chips for longer tool life
- Double margin construction improves hole accuracy
- 00 mm diameter suits precise machining tasks
- Brand M.A. Ford signals professional-grade quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should the 6.00mm double margins be inspected for wear?
Inspect the double margins when hole quality drops or coolant flow changes; the margins guide the drill and take the most contact.
What limits continuous drilling depth with this 8X coolant-fed drill?
The 8X diameter ratio sets the maximum recommended depth; chip evacuation and coolant pressure become the practical limits beyond that.
How hot does the 6.00mm shank get during all-day production runs?
Through-tool coolant keeps the cutting zone and shank near coolant temperature; expect only warm-to-touch conditions with proper flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
