M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 5.70 mm
Coolant-fed double-margin drill cuts 5.70 mm holes to 8× diameter depth
- Cyclone Xd design optimised for high-performance drilling
- 8X diameter capability enables deeper holes in one pass
- Coolant-fed channels improve chip evacuation and tool life
- Double margin construction enhances hole accuracy and finish
- 70 mm diameter suits precise metric applications
5.70 mm Coolant-Fed Drill
The M.A. Ford Cyclone Xd is a solid-carbide drill with an 8x diameter flute length and internal coolant delivery. Double margins guide the tool for straighter holes in deep-drilling operations. It suits CNC machinists who need reliable performance in steel, stainless and high-temperature alloys.
Sustained Deep-Hole Performance
Internal coolant flushes chips from the 8x depth zone, preventing packing that stalls conventional drills. Double margins maintain alignment as the flute length increases, reducing drift and breakage. The geometry supports consistent feed rates through the full hole depth without peck cycles.
Thermal Control and Power Use
Coolant flow through the tool carries heat away from the cutting edges, limiting thermal expansion and edge wear. Stable temperatures keep cutting forces predictable, so the spindle draws steady power rather than spiking. The design reduces the risk of workpiece distortion during long cycles.
Highlights
- Cyclone Xd design optimised for high-performance drilling
- 8X diameter capability enables deeper holes in one pass
- Coolant-fed channels improve chip evacuation and tool life
- Double margin construction enhances hole accuracy and finish
- 70 mm diameter suits precise metric applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 5.70 mm Cyclone Xd 8X generate during continuous drilling?
The drill is designed with coolant-fed channels that carry fluid through the tool to the cutting zone, removing heat directly where it forms.
What equipment must I already have to run coolant through this 5.70 mm drill?
You need a machine spindle with through-coolant capability and a compatible coolant delivery system that can supply fluid at the pressure your application requires.
Will the 5.70 mm double-margin design work in older drill holders I already own?
The shank follows standard dimensions for this diameter, so it fits conventional collets and holders you may already use for 5.70 mm tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
