M.A. Ford
M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill 5.20 mm
Coolant-fed double-margin drill with 8× diameter depth capability for 5.20 mm holes
- 8× diameter drilling depth for faster through-holes
- Coolant-fed design clears chips and reduces heat
- Double-margin geometry improves hole straightness and finish
- 20 mm diameter suits precise metric applications
- New M.A. Ford tool ready for immediate use
Cyclone XD 8X Coolant Fed Drill 5.20 mm
This M.A. Ford Cyclone XD drill is a coolant-fed, double-margin cutting tool designed for deep-hole drilling at 8× diameter depth. It targets machine shops and production lines that need reliable chip evacuation and hole straightness in tough alloys. The 5.20 mm diameter suits precision metalworking applications.
Suited for CNC deep-hole work in steel
Shops without through-spindle coolant or those drilling only shallow holes will not benefit from the coolant-fed design. Buyers needing larger or smaller diameters must select a different size. The tool is not intended for hand-held use or non-rigid setups.
5.20 mm diameter decides fit for the hole spec
The single specification that determines whether this is the correct part is the 5.20 mm cutting diameter. Match this value exactly to the required hole size in your drawing or process sheet. No other dimension in the data overrides this selection criterion.
Highlights
- 8× diameter drilling depth for faster through-holes
- Coolant-fed design clears chips and reduces heat
- Double-margin geometry improves hole straightness and finish
- 20 mm diameter suits precise metric applications
- New M.A. Ford tool ready for immediate use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Cyclone XD 8X drill diameter should I select for a 5.20 mm hole?
The CXDCLM0520AP is ground to 5.20 mm, so it matches that exact hole size without needing a different variant.
What does the 8X designation mean when the drill is running in a machine?
It indicates the tool can drill to a depth of eight times its 5.20 mm diameter in a single pass with coolant feed.
How does the coolant-fed shank affect performance on a standard CNC spindle?
Internal coolant channels deliver fluid directly to the cutting edges, improving chip evacuation and tool life at 5.20 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
