M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 3.50 mm
A coolant-fed double-margin drill with 3.50 mm diameter for deep-hole precision
- 8x diameter reach drills deeper holes in one pass
- Coolant-fed design clears chips for cleaner bores
- Double-margin geometry guides the drill for straighter cuts
- 50 mm diameter suits precise pilot-hole work
- New M.A. Ford tool arrives ready for immediate use
3.50 mm Cyclone Xd drill for precision holes
This 3.50 mm Cyclone Xd drill is built for high-accuracy drilling in demanding materials. Its double-margin design improves hole straightness and surface finish. The coolant-fed construction delivers fluid directly to the cutting zone. It suits machine shops and production cells that require consistent results.
8× diameter reach with through-coolant control
The 8× diameter flute length allows deep-hole drilling without peck cycles in many applications. Through-coolant flow evacuates chips efficiently and manages heat at the cutting lips. This reduces thermal damage to the workpiece and extends tool life under sustained load. Stable performance is maintained throughout the full depth of cut.
Standard shank fits common holders and collets
The drill uses a standard shank compatible with typical ER collets, hydraulic chucks and shrink-fit holders. No proprietary clamping system is required. Coolant must be supplied through the machine spindle or a compatible holder. Users without through-spindle coolant cannot use the internal cooling feature. Incorrect coolant pressure or misaligned holders will cause premature wear or breakage.
Highlights
- 8x diameter reach drills deeper holes in one pass
- Coolant-fed design clears chips for cleaner bores
- Double-margin geometry guides the drill for straighter cuts
- 50 mm diameter suits precise pilot-hole work
- New M.A. Ford tool arrives ready for immediate use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 3.50 mm drill generate excessive heat during prolonged use?
The Cyclone Xd 8X design feeds coolant through the tool to control temperature during extended drilling cycles.
What machine setup is required to run the coolant-fed drill?
A spindle with through-coolant capability and a compatible coolant delivery system are needed.
Will the double-margin geometry work with my existing 350 series tool holders?
The 3.50 mm shank fits standard holders for that diameter; verify your holder’s tolerance range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
