M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 3.25mm
A coolant-fed double-margin drill with an 8× diameter-to-length ratio for 3.25 mm holes
- Coolant-fed design delivers lubrication directly to the cutting zone
- Double-margin geometry improves hole straightness and surface finish
- 8X diameter capability enables deep-hole drilling in one pass
- 25 mm diameter suits precise small-hole applications
- New condition ensures full factory performance and reliability
Cyclone Xd 8X Coolant-Fed Drill
The M.A. Ford Cyclone Xd 8X is a coolant-fed double margin drill built for high-performance drilling. It targets machinists and engineers who need precise hole-making in demanding materials. The 3.25 mm diameter supports specific production requirements. This new tool arrives directly from the manufacturer.
Verify Coolant System and Holder Compatibility
Confirm your machine spindle delivers coolant through the tool at the required pressure and flow rate. Check that your tool holder accepts the drill shank style and provides adequate runout control. Ensure the workpiece setup allows safe chip evacuation for an 8X depth capability. Review the Proposition 65 warning regarding chemical exposure before use.
Double Margin Design Improves Hole Quality
The double margin geometry enhances hole straightness and surface finish during deep drilling cycles. Internal coolant channels deliver fluid directly to the cutting zone for heat reduction and chip removal. This design reduces the need for secondary finishing operations. The tool is supplied as a single drill unit without additional accessories or software.
Highlights
- Coolant-fed design delivers lubrication directly to the cutting zone
- Double-margin geometry improves hole straightness and surface finish
- 8X diameter capability enables deep-hole drilling in one pass
- 25 mm diameter suits precise small-hole applications
- New condition ensures full factory performance and reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford Cyclone Xd 8X drill include any accessories or coolant fittings in the box?
The product is supplied as the drill only; coolant fittings and holders must be sourced separately for through-spindle delivery.
What does the 3.25 mm diameter mean for hole-making in typical materials?
The 3.25 mm cutting diameter produces a finished hole of that size in steel, stainless steel and high-temperature alloys when run at recommended speeds and feeds.
How does the 8X length designation affect reach in a CNC machine?
The 8X designation gives a flute length of roughly 8 times the 3.25 mm diameter, providing extended reach for deep-hole drilling in a single setup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
