M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 23/64 9.13
A coolant-fed double-margin drill sized 23/64 inch and 9.13 mm for deep-hole precision
- 8x diameter drilling depth from Cyclone Xd design
- Coolant-fed channels clear chips for cleaner holes
- Double margin construction keeps hole straight
- 23/64 inch diameter suits precise applications
- 13 mm metric equivalent matches spec requirements
Drill diameter 23/64 and 9.13 mm
This M.A. Ford Cyclone Xd drill is built for high-performance holemaking in demanding materials. It targets machinists and fabricators who need a coolant-fed, double-margin tool for precision work. The 8X diameter capability supports deep-hole drilling in a single pass.
Sustained load performance 8X depth
Coolant fed through the tool body evacuates chips efficiently during extended cuts at 8X diameter depth. The double-margin design maintains alignment and hole straightness under continuous engagement. This reduces wandering and improves finish when drilling deep holes in tough alloys.
Thermal management coolant fed
Internal coolant delivery controls heat at the cutting edges during normal operation. Effective chip removal lowers friction and cutting temperatures compared with external flood coolant alone. Stable thermal conditions extend tool life and preserve dimensional accuracy in production runs.
Highlights
- 8x diameter drilling depth from Cyclone Xd design
- Coolant-fed channels clear chips for cleaner holes
- Double margin construction keeps hole straight
- 23/64 inch diameter suits precise applications
- 13 mm metric equivalent matches spec requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the Cyclone Xd 8X drill generate significant heat during extended use?
The drill incorporates coolant-fed channels that direct fluid through the tool body, helping to manage temperature during prolonged drilling cycles.
What tool holder or machine spindle is required to run the 23/64 inch shank?
A holder or spindle that accepts a 23/64 inch diameter shank is needed; the double-margin design does not change the mounting interface.
Will the CXDCL3594AP work reliably in a legacy CNC lathe with standard coolant pressure?
The drill is engineered for coolant-fed operation and its double-margin geometry supports stable cutting on older machines provided adequate coolant flow is supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
