M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 15.00mm
Coolant-fed double-margin drill creates 15.00 mm holes with 8× diameter depth capability
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin construction improves hole straightness and surface finish
- 8× diameter reach handles deep-hole applications in one pass
- Precise 15.00 mm cutting diameter for accurate sizing
- California Proposition 65 warning discloses regulated chemical content
Drill for deep-hole production
The Cyclone Xd 8X is a coolant-fed double-margin drill built for 15.00 mm holes at eight times diameter depth. It targets machine shops and production lines that need straight, accurate bores in steel, cast iron and high-temperature alloys without pecking cycles.
Sustained cutting stability
Through-tool coolant delivery flushes chips continuously, preventing packing and heat build-up during long, uninterrupted cuts. The double-margin design guides the drill along the full hole length, maintaining diameter tolerance and surface finish where single-margin tools tend to wander.
15.00 mm diameter decides fit
This drill cuts a single nominal size of 15.00 mm; if the drawing calls for any other diameter you must select a different tool. California Proposition 65 warnings apply because the coating contains a listed chemical.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin construction improves hole straightness and surface finish
- 8× diameter reach handles deep-hole applications in one pass
- Precise 15.00 mm cutting diameter for accurate sizing
- California Proposition 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 15.00 mm Cyclone Xd 8X generate during extended drilling?
The drill is designed with coolant-fed channels that direct fluid to the cutting edges, keeping temperatures low even during continuous operation.
What tool holder or machine spindle is required for the 15.00 mm shank?
A holder or spindle that accepts a 15.00 mm diameter shank is needed; the double-margin design ensures accurate alignment in standard precision holders.
Will the double-margin geometry work with older CNC machines that have less rigid spindles?
The double margins improve guidance and reduce vibration, which helps maintain hole quality even on machines with moderate spindle run-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
