M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 13/32 10.3
Coolant-fed double-margin drill cuts 13/32 inch or 10.3 mm holes with eight-times-diameter reach
- Cyclone Xd design enables 8× diameter drilling depth
- Coolant-fed operation delivers cutting fluid directly to the tip
- Double-margin construction improves hole straightness and finish
- 13/32 inch diameter suits standard fractional tooling
- 3 mm metric equivalent supports dual-specification workflows
Cyclone Xd 8X Coolant-Fed Drill
The M.A. Ford Cyclone Xd 8X is a coolant-fed double-margin drill built for demanding metal-cutting tasks. Its internal coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and tool life in deep-hole applications.
13/32 Inch and 10.3 mm Diameter Capacity
This drill measures 13/32 inch, equivalent to 10.3 mm, placing it in a mid-range diameter class for production drilling. It handles moderate material removal rates in steel and cast iron but reaches its limit in large-diameter or high-feed roughing operations.
Coolant-Fed Double-Margin Design Constraints
The double-margin geometry enhances hole straightness and surface finish by providing four-point land contact. Effective use requires a machine spindle with through-coolant capability and sufficient pressure; without it, the internal passages cannot perform their chip-flushing function.
Highlights
- Cyclone Xd design enables 8× diameter drilling depth
- Coolant-fed operation delivers cutting fluid directly to the tip
- Double-margin construction improves hole straightness and finish
- 13/32 inch diameter suits standard fractional tooling
- 3 mm metric equivalent supports dual-specification workflows
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 13/32 inch Cyclone Xd drill fit the collet on my existing CNC spindle?
The shank diameter matches the 13/32 inch size, so it will seat in any standard collet or holder made for that dimension.
How can I confirm the double-margin geometry is cutting correctly after installation?
Inspect the hole finish for straight, burn-free walls and listen for steady torque — chatter or oversize holes indicate margin contact problems.
Does the box include coolant fittings or only the 10.3 mm drill body?
Only the drill body is supplied; coolant delivery fittings and compatible tool holders must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
