M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 13.00 mm
Coolant-fed double-margin drill with 8× diameter depth capability for 13.00 mm holes
- 00 mm diameter drills precise holes
- Coolant-fed design removes heat during deep drilling
- Double margin construction improves hole straightness and finish
- Cyclone Xd geometry extends tool life in tough materials
- 8× diameter capability reaches deep cavities in one pass
Cyclone Xd 8X Drill 13.00 mm
The M.A. Ford Cyclone Xd 8X is a coolant-fed, double-margin drill with a 13.00 mm diameter. It is built for high-precision hole-making in demanding industrial applications where accuracy and tool life are critical.
Sustained load performance
Internal coolant channels deliver cutting fluid directly to the drill point, controlling temperature during deep or continuous cuts. The double-margin design stabilises the tool in the hole, reducing vibration and maintaining diameter consistency over long production runs.
Pre-order checks
Verify that your machine spindle and holder can supply coolant through the tool at the required pressure and flow rate. Confirm the 13.00 mm diameter matches the hole specification and that the workpiece material suits the drill geometry. Ensure your setup meets Proposition 65 handling requirements for the listed chemicals.
Highlights
- 00 mm diameter drills precise holes
- Coolant-fed design removes heat during deep drilling
- Double margin construction improves hole straightness and finish
- Cyclone Xd geometry extends tool life in tough materials
- 8× diameter capability reaches deep cavities in one pass
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 13.00 mm drill generate noticeable heat or vibration during extended production runs?
The Cyclone Xd 8X design uses coolant-fed channels and double margins to carry heat away from the cutting zone, keeping the 13.00 mm body stable during long cycles.
What machine setup is required before the CXDCLM1300AP can be used?
You need a CNC or rigid drill press with through-spindle coolant delivery and a holder that accepts a 13.00 mm shank.
Will this 13.00 mm drill fit the tool magazine and spindle interface on my older machining centre?
The straight 13.00 mm shank matches standard holders on legacy machines, provided the spindle can supply coolant through the tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
