M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 1200AP
Coolant-fed double-margin drill designed for 8× diameter depth drilling
- Cyclone Xd design enables 8× diameter drilling depth
- Coolant-fed channels deliver lubricant directly to the cutting zone
- Double-margin geometry improves hole straightness and surface finish
- Built by M.A. Ford for professional power-drilling applications
- New condition ensures full factory performance from first use
Cyclone Xd 8X Coolant-Fed Drill
The M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill is a new cutting tool designed for high-performance drilling operations. It targets machinists and manufacturers who require efficient chip evacuation and hole accuracy in demanding materials. The coolant-fed design supports extended tool life and consistent performance during deep-hole applications. Buyers needing a standard non-coolant drill for general-purpose use should consider other options.
Thermals, Noise and Power Draw
Operational heat is managed directly through the internal coolant channels that deliver fluid to the cutting zone. This system controls thermal buildup at the workpiece interface without relying on external cooling alone. Power draw depends entirely on the machine spindle and the specific cutting parameters selected for the job. No acoustic rating or decibel figure is provided for this tool.
8X Diameter Drilling Depth Capability
The drill offers an 8X diameter drilling depth capability, enabling deep-hole production in a single pass. This reach is the primary specification that determines suitability for applications requiring extended length-to-diameter ratios. The double margin design improves hole straightness and surface finish throughout that depth. Shops requiring longer or shorter reach must verify their specific depth requirements against this 8X limit.
Highlights
- Cyclone Xd design enables 8× diameter drilling depth
- Coolant-fed channels deliver lubricant directly to the cutting zone
- Double-margin geometry improves hole straightness and surface finish
- Built by M.A. Ford for professional power-drilling applications
- New condition ensures full factory performance from first use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How is the CXDCL1200AP installed in a coolant-fed holder, and which step is most often missed?
Mount the drill in a compatible coolant-fed holder, align the double margins with the spindle, then connect the coolant line to the through-tool port; the step most often missed is verifying coolant flow before starting the cut.
What maintenance or replacement will the CXDCL1200AP need after extended use?
The cutting edges will dull and require regrinding or replacement; inspect the double margins for wear and replace the drill when margin width falls below specification.
What limit appears first on the CXDCL1200AP during sustained high-speed drilling?
Heat buildup at the cutting interface becomes the limiting factor; without adequate coolant flow through the 8X channels, edge degradation accelerates rapidly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
