M.A. Ford
M.A. Ford Cyclone Xd 8X Coolant Fed Double Margin Drill 12.10 mm
A 12.10 mm coolant-fed double-margin drill designed for 8× diameter deep-hole drilling
- 10 mm diameter drills precise holes
- 8X flute design improves chip evacuation
- Coolant-fed channels extend tool life
- Double-margin construction boosts hole accuracy
- New condition ensures full factory performance
Cyclone Xd 8X Drill 12.10 mm
The M.A. Ford Cyclone Xd is a coolant-fed double-margin drill with an 8X diameter-to-length ratio and a 12.10 mm cutting diameter. It is engineered for deep-hole drilling in production environments where consistent chip evacuation and hole straightness are critical. Machinists running CNC centres with through-spindle coolant will gain the most from its design.
Compatibility check before ordering
Verify that your machine provides through-spindle coolant at the pressure and flow rate the tool requires for 8X depth drilling. Confirm the tool holder accepts the shank style and that the spindle can deliver the run-out tolerance needed for a double-margin geometry. Ensure the workpiece material matches the drill's intended application range.
Sustained-load behaviour
Continuous coolant delivery through the flutes stabilises cutting temperatures during extended cuts, reducing thermal drift and margin wear. The double-margin design maintains hole alignment and surface finish over the full 8X depth without the wandering seen in single-margin drills. Chip evacuation remains steady, preventing packing that can stall the spindle or damage the workpiece.
Highlights
- 10 mm diameter drills precise holes
- 8X flute design improves chip evacuation
- Coolant-fed channels extend tool life
- Double-margin construction boosts hole accuracy
- New condition ensures full factory performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What comes in the box with the CXDCLM1210AP drill and is any accessory sold separately?
The box contains the 12.10 mm Cyclone Xd 8X coolant-fed double-margin drill. Coolant supply fittings and tool-holder collets are not included and must be sourced separately.
Which diameter should I choose if the job calls for a 12.10 mm hole?
Select the CXDCLM1210AP model; its cutting diameter is 12.10 mm and matches the required hole size directly.
What does the 8X designation mean when the drill is running in a CNC machine?
The 8X rating indicates the flute length allows drilling up to eight times the 12.10 mm diameter in a single pass with coolant fed through the tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
