M.A. Ford
M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill 11.90 mm
Coolant-fed double-margin drill cuts precise 11.90 mm holes at 8× diameter depth
- 8x diameter drilling depth reduces cycle time
- Coolant-fed design evacuates chips efficiently
- Double margin geometry improves hole straightness
- 90 mm diameter suits precise hole sizing
- M.A. Ford brand signals professional tool quality
Application fit
The M.A. Ford Cyclone XD 8X Coolant Fed Double Margin Drill is an 11.90 mm cutting tool designed for deep-hole drilling in demanding materials. It suits machinists and maintenance teams who need coolant-through capability and double-margin stability for accurate, straight holes at extended depth-to-diameter ratios. Buyers who require a smaller diameter, a non-coolant-fed design or a general-purpose twist drill will not find those features here.
Installation notes
The drill fits standard tool holders that accept an 11.90 mm shank and a coolant-through spindle connection. Secure the holder, verify coolant flow before starting, and use the recommended peck cycle for the workpiece material. Common issues include insufficient coolant pressure causing chip packing, incorrect holder run-out leading to margin wear, and skipping the peck cycle which can break the tool in deep holes.
Pre-order checks
Confirm the machine spindle delivers coolant through the tool and that the holder matches the shank style of this drill. Verify the workpiece material and thickness are compatible with an 8X diameter-to-depth ratio. Ensure the control supports the required peck-drilling cycle and that the tool length fits within the machine envelope. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- 8x diameter drilling depth reduces cycle time
- Coolant-fed design evacuates chips efficiently
- Double margin geometry improves hole straightness
- 90 mm diameter suits precise hole sizing
- M.A. Ford brand signals professional tool quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I confirm the 11.90 mm Cyclone XD drill is cutting correctly after setup?
Verify hole diameter matches 11.90 mm, check for consistent chip evacuation through coolant holes, and ensure double margins maintain straightness without vibration
What comes with the CXDCLM1190AP drill and what must I supply separately?
The drill body is included; you must provide a compatible tool holder, coolant delivery system, and suitable workpiece clamping
Which Cyclone XD version should I choose for an 11.90 mm hole?
Select the CXDCLM1190AP model, designated for 11.90 mm diameter with 8×D depth capability and coolant-fed double-margin design
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
