M.A. Ford
M.A. Ford Cyclone Xd 5X Solid Double Margin Drill 5/32
Solid double-margin drill with 5x diameter depth for precise holemaking in tough materials
- 5X drilling depth reduces cycle time
- solid double margin design improves hole straightness
- Cyclone Xd coating extends tool life
- 5/32 inch diameter fits precise applications
- M.A. Ford quality ensures reliable performance
Cyclone Xd 5X drill for precision holes
The M.A. Ford Cyclone Xd 5X is a solid double margin drill with a 5/32 inch diameter. It targets machinists who need accurate hole sizing and improved stability in difficult materials. The double margin design supports better alignment and surface finish during deep drilling operations. This accessory fits standard tool holders for CNC and manual machines.
Replaces single-margin drills in tough alloys
Upgrading from a standard single-margin drill makes sense when hole straightness and roundness are critical. The extra margin reduces chatter and wandering in stainless steel, titanium and high-temperature alloys. The jump is worth it when scrap rates rise due to misaligned holes or when cycle times increase from conservative feed rates. It also helps when coolant delivery is limited.
Suits job shops and aerospace cells
Shops running short-run batches in exotic metals will benefit from the tighter tolerance control. High-volume lines with rigid fixtures and through-coolant may not see a proportional gain. Buyers who need larger diameters or carbide-tipped variants should look at other series. This drill is not for wood, plastic or soft aluminium where standard twist drills perform adequately.
Highlights
- 5X drilling depth reduces cycle time
- solid double margin design improves hole straightness
- Cyclone Xd coating extends tool life
- 5/32 inch diameter fits precise applications
- M.A. Ford quality ensures reliable performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What chuck size does the 5/32 inch Cyclone Xd drill require?
The 5/32 inch diameter shank fits a standard drill chuck that accepts bits of that size; ensure the chuck tightens fully on the solid shank.
How do I install the solid double margin drill bit correctly?
Insert the shank fully into the chuck jaws, tighten securely on the solid section, and start drilling at low speed to establish the hole before increasing RPM.
When should I replace the Cyclone Xd 5X drill bit?
Replace the bit when the cutting lips show wear, chipping, or when drilling force increases noticeably; the double margin design maintains guidance until the margins themselves wear down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
