M.A. Ford
M.A. Ford Cyclone XD 5X Solid Double Margin Drill 11.30 mm
11.30 mm solid double-margin drill with 5X flute geometry for precise holemaking
- 30 mm diameter fits precise drilling tasks
- 5X solid construction resists wear in tough materials
- Double margin design improves hole accuracy and stability
- Cyclone XD geometry enhances chip evacuation efficiency
- New condition ensures full factory performance out of the box
11.30 mm Solid Double Margin Drill
The M.A. Ford Cyclone XD 5X is a solid double margin drill with an 11.30 mm diameter. It is designed for precision hole-making in demanding materials where hole straightness and surface finish are critical. Professional machinists and maintenance technicians use it for accurate drilling operations.
Verify Tool Holder and Machine Rigidity
Confirm that your machine spindle and tool holder provide sufficient runout accuracy and clamping force for a solid carbide drill. The workpiece must be rigidly fixtured to prevent vibration during the 5X diameter drilling cycle. Check coolant delivery capability for effective chip evacuation at depth.
Requires High-Pressure Coolant and Stable Fixturing
This drill performs best with through-tool high-pressure coolant to manage chips in deep holes. It frees the operator from frequent pecking cycles by maintaining straightness over 5X diameter. The double margin design stabilises the tool in the cut, reducing the need for secondary finishing operations. California Proposition 65 warning applies.
Highlights
- 30 mm diameter fits precise drilling tasks
- 5X solid construction resists wear in tough materials
- Double margin design improves hole accuracy and stability
- Cyclone XD geometry enhances chip evacuation efficiency
- New condition ensures full factory performance out of the box
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford Cyclone XD 11.30 mm drill ship with any holders or coolant accessories, or must those be purchased separately?
The product is supplied as the solid double margin drill bit only; tool holders, coolant systems or other accessories are not included and must be sourced separately.
How does the 5X designation on the CXDSR 1130AP model affect the choice versus other lengths in the Cyclone XD range?
The 5X refers to a length-to-diameter ratio of five, giving this 11.30 mm drill a longer flute and overall length than 3X or 8X variants, so select it when the hole depth requires that specific reach.
What does the 11.30 mm diameter mean for chip evacuation and hole tolerance when the drill is running in a CNC machine?
At 11.30 mm the solid double margin design provides two guiding lands that stabilise the tool in the cut, improving roundness and surface finish while the flute geometry clears chips efficiently at this diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
