M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 8.80mm
Coolant-fed double-margin drill, 8.80 mm diameter, for five-times-diameter depth holes
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin geometry improves hole accuracy and surface finish
- 5× diameter reach handles deeper holes in one pass
- 80 mm cutting diameter suits precise metric applications
- California Proposition 65 warning notes chemical exposure risk
M.A. Ford Cyclone Xd 5X Drill 8.80mm
The M.A. Ford Cyclone Xd 5X is a coolant-fed double margin drill with an 8.80mm diameter. It is built for precision holemaking in demanding materials. The tool suits professional machinists and manufacturing operations that require accurate, deep-hole drilling performance.
Suited for high-precision production drilling
This drill serves workshops running CNC machines with through-spindle coolant capability. It is not for buyers who need a hand-held drill bit or a tool compatible with standard drill presses lacking coolant feed. Operations without high-pressure coolant systems should look at alternative tooling.
8.80mm diameter double margin geometry
The 8.80mm cutting diameter and double margin design provide the guidance and stability that define this drill's capability. The coolant-fed construction supports chip evacuation and tool life in deep holes. Proposition 65 warnings apply to chemicals present in the product.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Double-margin geometry improves hole accuracy and surface finish
- 5× diameter reach handles deeper holes in one pass
- 80 mm cutting diameter suits precise metric applications
- California Proposition 65 warning notes chemical exposure risk
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How is the 8.80 mm coolant-fed drill installed, and what step do people get wrong?
Mount the drill in a rigid holder, align the coolant port with the machine's through-spindle supply, and torque the clamp evenly; the step often missed is verifying coolant flow before cutting.
What maintenance or replacement will the double-margin 8.80 mm drill need later?
Inspect both margins for wear after each job, regrind the point geometry when flank wear reaches the limit, and replace the tool once the margins can no longer guide the hole straight.
What limit shows up first on the 5XD Cyclone Xd drill under sustained use?
Margin wear typically appears before point breakdown, reducing hole straightness and signalling that the drill should be pulled for reconditioning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
