M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 35/64
Coolant-fed double-margin drill bit sized 35/64 for deep-hole precision
- 5X drilling depth reduces cycle time
- coolant-fed design clears chips efficiently
- double margin geometry improves hole straightness
- 35/64 inch diameter suits precise applications
- Prop 65 listed for chemical awareness
M.A. Ford Cyclone Xd 5X Drill
The M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill is a precision cutting tool manufactured by M.A. FORD. It is designed for professional machinists and industrial maintenance teams who require accurate hole production in demanding materials. The 35/64 inch diameter suits specific engineering tolerances. This new item ships directly from the manufacturer.
Coolant-fed performance under load
The coolant-fed design delivers cutting fluid directly to the drill point through internal channels. This architecture maintains consistent temperatures during extended drilling cycles rather than brief operations. The double margin configuration provides secondary guiding surfaces that stabilise the tool throughout deep-hole applications. Continuous lubrication prevents chip welding and preserves edge integrity when heat accumulates.
35/64 inch diameter specification
The 35/64 inch cutting diameter is the primary parameter that determines compatibility with your hole-size requirement. Verify this exact fractional measurement against your blueprint or work order before purchase. The CXDCR5469AP part number confirms the specific drill configuration for reordering. California Proposition 65 warnings apply regarding chemical exposure risks.
Highlights
- 5X drilling depth reduces cycle time
- coolant-fed design clears chips efficiently
- double margin geometry improves hole straightness
- 35/64 inch diameter suits precise applications
- Prop 65 listed for chemical awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the Cyclone Xd 5X drill generate during extended production runs?
The double-margin design and coolant-fed channels evacuate heat directly from the cutting zone, keeping the tool body cooler than non-cooled drills in continuous operation.
What machine setup is required to use the coolant-fed feature on this 35/64 drill?
A spindle or tool holder with through-coolant capability and a compatible coolant delivery system are needed to supply fluid through the internal passages.
Will the 35/64 Cyclone Xd 5X fit the same tool holders as my existing 5469 series drills?
Yes, the shank dimensions follow the same standard, so it mounts in the holders you already use for the 5469 series without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
