M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 19/64
A coolant-fed double-margin drill bit sized 19/64 for deep-hole drilling
- Coolant-fed design improves chip evacuation during deep drilling
- Double margin construction enhances hole accuracy and surface finish
- Cyclone Xd geometry extends tool life in tough materials
- 5× diameter capability reduces need for peck drilling cycles
- 19/64 inch diameter suits precise hole-making applications
Cyclone Xd 5X Coolant Fed Drill 19/64
The M.A. Ford Cyclone Xd is a coolant-fed double-margin drill sized at 19/64 inch. It is built for high-precision holemaking in demanding metalworking applications where controlled chip evacuation and tool life are critical.
Verify machine coolant delivery
Confirm that your equipment supplies through-tool coolant at the pressure and flow the drill requires. Check that your tool holder accepts the shank style and that workpiece clamping provides the rigidity needed for deep-hole drilling cycles.
Suited for production shops running deep-hole cycles
This drill serves operations that need consistent straightness and finish in difficult alloys. Shops without through-spindle coolant capability or those drilling only shallow holes in soft materials will not use its design advantages.
Highlights
- Coolant-fed design improves chip evacuation during deep drilling
- Double margin construction enhances hole accuracy and surface finish
- Cyclone Xd geometry extends tool life in tough materials
- 5× diameter capability reduces need for peck drilling cycles
- 19/64 inch diameter suits precise hole-making applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is included with the CXDCR2969AP drill and what must be purchased separately?
The box contains the 19/64 double margin drill. Coolant supply and a compatible tool holder are not included and must be sourced separately.
How do I choose between the available versions of the Cyclone Xd 5X drill?
The listed item is the 19/64 size identified by part number CXDCR2969AP. Select this version when your application requires that exact diameter.
What does the 5X designation mean when the drill is used in a machine?
The 5X indicates a flute length five times the 19/64 diameter, allowing deeper holes in a single pass with coolant fed through the tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
