M.A. Ford
M.A. Ford Cyclone Xd 5X Coolant Fed Double Margin Drill 15/32
Coolant-fed double-margin drill, 15/32 inch diameter, designed for 5× depth drilling
- Coolant-fed design extends tool life during deep-hole drilling
- Double-margin geometry improves hole straightness and surface finish
- 5× diameter reach handles deep drilling in a single pass
- 15/32 inch diameter suits medium-size hole applications
- M.A. Ford manufacturing delivers consistent performance in tough materials
15/32 Double Margin Drill
The M.A. Ford Cyclone Xd 5X is a coolant fed double margin drill sized at 15/32. It targets machinists who need a dedicated tool for deep hole drilling in metal. The double margin design supports hole straightness and finish quality. This item is supplied new from the manufacturer.
Sustained Load Behaviour
Coolant fed operation removes heat from the cutting zone during extended drilling cycles. The double margin geometry maintains guidance when the drill body engages the workpiece over long depths. Chip evacuation remains consistent because coolant pressure clears the flutes continuously. This reduces the risk of binding or premature wear in production runs.
Thermals Noise and Power
Coolant flow manages cutting temperature directly at the interface, limiting thermal expansion in the tool and workpiece. Power demand on the machine spindle stays stable because the drill cuts efficiently without excessive force. Operational noise is typical for high speed metal cutting and depends on the machine tool enclosure. The tool carries a California Proposition 65 warning for chemical exposure.
Highlights
- Coolant-fed design extends tool life during deep-hole drilling
- Double-margin geometry improves hole straightness and surface finish
- 5× diameter reach handles deep drilling in a single pass
- 15/32 inch diameter suits medium-size hole applications
- M.A. Ford manufacturing delivers consistent performance in tough materials
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the CXDCR4688AP generate during continuous drilling?
The CXDCR4688AP uses internal coolant channels to carry heat away from the cutting edges, keeping the tool body cooler during extended runs.
What machine setup is required to run the coolant-fed 15/32 drill?
You need a spindle with through-coolant capability and a holder that seals the coolant path to the drill shank.
Will the 15/32 Cyclone Xd fit in my older CNC holder?
It fits standard holders for a 15/32 shank, but the holder must also support through-coolant sealing to use the internal feed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
