M.A. Ford
M.A. Ford Cyclone XD 3X Solid Double Margin Drill 4.10 mm
4.10 mm solid double-margin drill delivers three-times-diameter depth in a single pass
- 10 mm diameter suits precise drilling tasks
- Solid double margin design improves hole accuracy
- Cyclone XD 3X construction enhances tool durability
- New condition ensures full factory performance
- California Proposition 65 warning indicates chemical awareness
M.A. Ford Cyclone XD 3X Drill
The M.A. Ford Cyclone XD 3X is a solid double margin drill with a 4.10 mm cutting diameter. It is manufactured for precision holemaking in demanding applications. The tool carries the M.A. Ford brand and is supplied new. California Proposition 65 warnings apply to this product.
Suited for controlled drilling operations
This drill suits machinists who need a rigid, double margin design for accurate holes at the 4.10 mm size. It is not for buyers who need a different diameter or a coolant-through shank. Users requiring a step drill or a countersink should look at other tool types.
Standard shank fits common holders
Installation consists of clamping the shank into a compatible drill chuck or collet holder. Problems usually arise when runout is excessive or when the workpiece is not rigidly secured. Chip evacuation can become difficult in deep holes without peck cycles.
Highlights
- 10 mm diameter suits precise drilling tasks
- Solid double margin design improves hole accuracy
- Cyclone XD 3X construction enhances tool durability
- New condition ensures full factory performance
- California Proposition 65 warning indicates chemical awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill chuck size do I need to hold the 4.10 mm shank of this Cyclone XD drill?
A chuck that closes to 4.10 mm or smaller will grip the shank; most standard three-jaw drill chucks cover this capacity.
Can I use this 4.10 mm solid double margin drill in a standard corded drill motor?
Yes, it fits any rotary drill with a chuck that accepts a 4.10 mm shank; the solid double margin design adds stability in handheld use.
How can I confirm the drill is cutting correctly after I start the hole?
The double margins should produce a straight, round hole with consistent chip evacuation; measure the finished hole to verify it matches the 4.10 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
