M.A. Ford
M.A. Ford Cyclone Xd 3X Solid Double Margin Drill 11/16
Solid double-margin drill bit with 11/16 inch diameter for precision power-tool drilling
- Solid double margin design improves hole straightness
- Cyclone Xd 3X construction extends tool life in tough materials
- 11/16 inch diameter matches common automotive fastener sizes
- M.A. Ford manufacturing quality ensures consistent performance
- California Proposition 65 warning informs safe handling practices
Cyclone Xd 3X drill for precision holes
The Cyclone Xd 3X solid double margin drill creates accurate 11/16 inch holes in demanding materials. It is built for machinists and maintenance teams who need consistent results in production or repair work. The double margin design improves guidance and finish quality. This tool suits workshops that value repeatable performance.
Capacity and headroom for 11/16 inch drilling
The drill handles 11/16 inch diameter holes with stability from its solid construction and three-flute geometry. It performs well in steels and alloys where chip evacuation and hole straightness matter. The tool reaches its limit when material hardness or depth exceeds the design envelope for this diameter. Users should match feed and speed to the specific workpiece.
Thermals noise and power draw in use
Heat generation stays manageable when cutting parameters follow standard practice for the 11/16 size. The solid body conducts heat away from the cutting edges during normal cycles. Noise levels reflect typical high-speed drilling in metal. Power consumption depends on the machine spindle and the material being cut.
Highlights
- Solid double margin design improves hole straightness
- Cyclone Xd 3X construction extends tool life in tough materials
- 11/16 inch diameter matches common automotive fastener sizes
- M.A. Ford manufacturing quality ensures consistent performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 11/16 inch Cyclone Xd drill fit in the same 1/2 inch chuck I use with my older bits?
The 11/16 inch shank exceeds a standard 1/2 inch chuck capacity; you will need a 3/4 inch or larger chuck to run this drill.
How can I confirm the double-margin geometry is cutting correctly once I start drilling?
Look for two distinct, parallel wear lands on the margins and a straight, round hole without chatter marks; that shows both margins are engaged.
Does the box include any cutting fluid or only the CXDSS6875AP drill itself?
Only the solid carbide Cyclone Xd 3X drill is supplied; cutting fluid, tool holders and coolant accessories must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
