M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill No 24
Coolant-fed double-margin drill sized No 24 for high-precision drilling
- Cyclone Xd design drills three diameters deep with internal coolant feed
- Double margin construction improves hole straightness and surface finish
- Drill number 24 matches precise hole-size requirements
- M.A. Ford manufacturing delivers professional-grade cutting performance
- California Proposition 65 warning informs safe handling practices
Cyclone Xd 3X Coolant Fed Drill
The M.A. Ford Cyclone Xd 3X is a coolant fed double margin drill designed for precision hole making in demanding materials. It targets machinists and fabricators who require consistent chip evacuation and tight tolerance control. The tool suits production environments where coolant delivery through the spindle is available. It is not for operators limited to external flood coolant only.
Capacity and Headroom
The No 24 designation identifies the specific drill size within the Cyclone Xd range. The 3X geometry provides the length to diameter ratio for moderate depth holes without pecking cycles. Double margins deliver the stability needed for straightness and surface finish in deeper cuts. The design runs out when hole depths exceed the 3X flute length or when machine coolant pressure falls below the threshold for effective through tool delivery.
Practical Interface Limits
The shank configuration fits standard tool holders compatible with the machine spindle interface in use. Coolant fed operation requires a sealed connection between the holder and the drill shank to maintain pressure. Performance is constrained by the machine spindle speed range and the available coolant pressure at the tool tip. California Proposition 65 warnings apply regarding chemical exposure during use.
Highlights
- Cyclone Xd design drills three diameters deep with internal coolant feed
- Double margin construction improves hole straightness and surface finish
- Drill number 24 matches precise hole-size requirements
- M.A. Ford manufacturing delivers professional-grade cutting performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the No 24 drill fit the coolant-fed spindle on my older CNC lathe?
The No 24 Cyclone Xd 3X is built with a double-margin flute and through-coolant holes, so it mates with standard coolant-fed holders that accept a No 24 shank.
How can I confirm the CXDCS1520AP is delivering coolant correctly during the first test cut?
Watch for a steady stream of coolant exiting both flute margins at the drill point; consistent flow means the internal passages are clear and the tool is operating as designed.
Does the CXDCS1520AP package include collets or coolant fittings, or must I order them separately?
The box contains only the No 24 Cyclone Xd 3X drill; collets, pull studs and coolant adapters are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
