M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 9.30 mm
Coolant-fed double-margin drill delivers precise 9.30 mm holes at 3x diameter depth
- Cyclone Xd design boosts drilling efficiency
- 3X coolant-fed system improves chip evacuation
- Double margin construction enhances hole accuracy
- 30 mm diameter suits precise applications
- California Proposition 65 compliance ensures safety awareness
Cyclone Xd 9.30 mm drill purpose
The M.A. Ford Cyclone Xd is a 9.30 mm diameter coolant-fed drill with a 3× length-to-diameter ratio. It is designed for production drilling of deep holes in steels, stainless steels and high-temperature alloys. The double-margin geometry improves hole straightness and surface finish in demanding materials.
Build integration and coolant requirements
The tool requires a machine spindle capable of through-coolant delivery and a holder that seals at the shank. Its 3× flute length reduces the need for frequent peck cycles, freeing cycle time on CNC centres and multi-spindle transfer lines. Rigid toolholding and stable workholding are essential to maintain the double-margin guidance.
Sustained-load behaviour
Continuous coolant flow through the flutes evacuates chips and controls heat at the cutting edges during extended cuts. The double margins maintain alignment as the drill penetrates deeper, reducing wander and margin wear. This geometry supports consistent hole size and finish over long production runs without premature edge breakdown.
Highlights
- Cyclone Xd design boosts drilling efficiency
- 3X coolant-fed system improves chip evacuation
- Double margin construction enhances hole accuracy
- 30 mm diameter suits precise applications
- California Proposition 65 compliance ensures safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What diameter hole does the 9.30 mm Cyclone Xd 3X drill produce under sustained use?
The drill is ground to 9.30 mm, so it cuts a 9.30 mm diameter hole in continuous operation.
How much heat does the coolant-fed design dissipate during all-day drilling?
Internal coolant channels carry fluid directly to the cutting edges, removing heat at the source during extended runs.
Which machine spindle and coolant system are required to run this double-margin drill?
A spindle that accepts a 9.30 mm shank and a pressurised coolant supply are needed for the through-tool feed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
