M.A. Ford
M.A. Ford Cyclone Xd 3X Coolant Fed Double Margin Drill 15.30mm
Coolant-fed double-margin drill with 3× diameter reach for 15.30 mm holes
- 3X flute design improves chip evacuation at 15.30mm diameter
- Coolant-fed channels deliver fluid directly to the cutting zone
- Double margin construction stabilises the drill for straighter holes
- Cyclone Xd geometry reduces cutting forces during deep drilling
- M.A. Ford manufacturing quality ensures consistent performance per unit
Cyclone Xd 15.30 mm Drill
The M.A. Ford Cyclone Xd is a 15.30 mm coolant-fed double-margin drill designed for production drilling where through-tool coolant and guided margins improve hole straightness and tool life. It is built for machinists running CNC cycles that demand consistent chip evacuation.
Suited for high-volume metalcutting.
This tool suits shops cutting steel, stainless or cast iron on rigid machines with coolant systems capable of feeding fluid through the spindle. It is not for portable drills, drill presses without through-coolant, or jobs requiring a different diameter.
Steady performance in deep holes
The double-margin design and internal coolant channel keep cutting forces balanced and temperatures stable during extended cuts, reducing wander and preventing chip packing that can stall a cycle. Consistent feed rates are maintained over long reach.
Highlights
- 3X flute design improves chip evacuation at 15.30mm diameter
- Coolant-fed channels deliver fluid directly to the cutting zone
- Double margin construction stabilises the drill for straighter holes
- Cyclone Xd geometry reduces cutting forces during deep drilling
- M.A. Ford manufacturing quality ensures consistent performance per unit
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What coolant system does my machine need to supply the Cyclone Xd 15.30mm drill?
The drill is coolant-fed and requires a machine spindle or holder that delivers coolant through the tool at the pressure and flow rate recommended for 15.30mm diameter drilling.
Can I run this 15.30mm drill in a holder designed for standard 15mm shanks?
The 15.30mm diameter exceeds a nominal 15mm shank; use a precision collet or hydraulic holder sized for 15.30mm to maintain concentricity and prevent slippage.
How do I confirm the double-margin geometry is cutting correctly after setup?
Check for two distinct, evenly worn margin lands on the drill body and measure hole diameter and straightness; consistent 15.30mm holes with good finish indicate proper engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
