M.A. Ford
M.A. Ford Cyclone Xd 1140AP 11.40mm Coolant Fed Double Margin Drill
Coolant-fed double-margin drill with 11.40 mm diameter for high-precision drilling
- Precision 11.40 mm drilling for tight tolerances
- Coolant-fed design clears chips and reduces heat
- Double margin geometry improves hole straightness
- Cyclone Xd coating extends tool life in tough materials
- California Proposition 65 warning for regulated substances
Cyclone Xd 11.40 mm Drill
The M.A. Ford Cyclone Xd 1140AP is a solid-carbide drill with through-coolant delivery and double-margin geometry. It targets machine shops that need accurate holes in tough alloys on CNC equipment. The 3× length of cut suits standard-depth drilling cycles in production environments.
Coolant-Fed Carbide Limits
Through-tool coolant improves chip evacuation and temperature control, yet the fixed 3× flute length caps maximum hole depth. The double margins add guidance but increase torque demand on the spindle. Users must match machine rigidity and coolant pressure to the tool diameter to avoid deflection.
11.40 mm Diameter Decides Fit
The 11.40 mm cutting diameter is the sole specification that determines whether this drill matches the required hole size. Shops needing a different diameter, a longer flute length, or a non-coolant design must select another tool. California Proposition 65 warnings apply to this product.
Highlights
- Precision 11.40 mm drilling for tight tolerances
- Coolant-fed design clears chips and reduces heat
- Double margin geometry improves hole straightness
- Cyclone Xd coating extends tool life in tough materials
- California Proposition 65 warning for regulated substances
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Should I pick the 11.40 mm Cyclone Xd or a different diameter?
Choose the 11.40 mm size when your hole spec calls for that exact diameter; the double-margin design keeps it running straight in steel and cast iron.
What does the 3X in the model name mean once the drill is in the machine?
It indicates a flute length roughly three times the 11.40 mm diameter, giving deeper holes per plunge without Peck cycles.
How does the coolant-fed shank change what the tool can do?
Internal coolant exits at the tip, flushing chips and cutting heat so the drill holds size and finish at higher feed rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
