M.A. Ford
M.A. Ford Cyclone Drill Aluminum 5X 2 Flute Coolant Fed CDACRM0910
Cyclone drill cuts aluminium with two flutes and internal coolant feed
- Designed for aluminium with a 5× flute geometry
- Two-flute configuration improves chip evacuation in soft metals
- Coolant-fed design delivers fluid directly to the cutting zone
- Brand-new M.A. Ford tooling ensures factory-original performance
- Complies with California Proposition 65 chemical-disclosure requirements
Cyclone Drill for Aluminium 5X 2 Flute
The M.A. Ford Cyclone Drill is a coolant-fed cutting tool designed for aluminium machining. Its 5X diameter flute length and two-flute geometry support deep-hole drilling with efficient chip evacuation. The drill is supplied new and ships directly from the manufacturer.
Suited for CNC aluminium work needing
Machinists requiring extended reach in non-ferrous materials will benefit from the 5X length and internal coolant feed. It is not intended for handheld use, for ferrous alloys, or for operations that cannot supply through-tool coolant.
5X diameter flute length
This single specification determines whether the drill matches the hole-depth and material-removal requirements of the job. Verify that the machine spindle and coolant system can accommodate the 5X reach before purchase.
Highlights
- Designed for aluminium with a 5× flute geometry
- Two-flute configuration improves chip evacuation in soft metals
- Coolant-fed design delivers fluid directly to the cutting zone
- Brand-new M.A. Ford tooling ensures factory-original performance
- Complies with California Proposition 65 chemical-disclosure requirements
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should the coolant passages in the CDACRM0910 be cleared during long production runs?
The through-tool coolant channels flush chips continuously; clearing is only needed if flow drops noticeably during a shift.
What limits continuous drilling depth with this 5×D Cyclone drill?
The 5× diameter flute length sets the maximum hole depth in a single pass without pecking.
Does the CDACRM0910 run hot enough to require external cooling beyond its internal feed?
The internal coolant delivery carries heat away from the cutting zone, keeping the tool body at stable temperature during all-day operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
