M.A. Ford
M.A. Ford Cyclone Drill Aluminum 5X 2 Flute Coolant Fed 790
A 5× diameter coolant-fed drill with two flutes for aluminium, model 790
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry improves chip evacuation in soft metals
- Internal coolant feed delivers fluid directly to the cutting zone
- M.A. Ford brand trusted for precision cutting tools
- New condition ensures full factory performance and reliability
Cyclone Drill for Aluminium 5X 2 Flute
The M.A. Ford Cyclone drill is built for aluminium machining with a 5X diameter flute length and two-flute geometry. It targets machine-shop operators and CNC programmers who need a coolant-fed tool for deep-hole drilling in non-ferrous alloys. The design prioritises chip evacuation and hole straightness in long-reach applications.
Coolant-Fed Shank Fits Standard Holders
A through-coolant shank delivers cutting fluid directly to the drill point, reducing the need for external flood coolant and freeing up spindle clearance. The tool mounts in standard ER or hydraulic holders, so no proprietary adapters are required. This integration suits high-mix cells where setup time between jobs must stay short.
Two-Flute Geometry Holds Size Under Load
The two-flute construction maintains diameter consistency and surface finish during continuous drilling cycles, even when heat builds in the workpiece. Coolant flow through the flutes prevents chip packing that can cause wander or breakage in deep holes. The drill is not intended for ferrous materials or interrupted cuts where a heavier web would be needed.
Highlights
- Designed for aluminium machining with 5X diameter reach
- Two-flute geometry improves chip evacuation in soft metals
- Internal coolant feed delivers fluid directly to the cutting zone
- M.A. Ford brand trusted for precision cutting tools
- New condition ensures full factory performance and reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is the maximum hole depth the 5× flute length can reach in aluminium before chip evacuation becomes the limiting factor?
The 5× flute length allows drilling up to five times the drill diameter in aluminium; chip evacuation through the coolant-fed flutes remains effective within that range.
How much heat and noise does the coolant-fed design produce during continuous CNC cycles?
Internal coolant delivery carries heat away from the cutting zone and suppresses noise, keeping the tool and workpiece cooler during extended runs.
Which machine and holder features are required to run this coolant-fed cyclone drill?
A CNC spindle with through-coolant capability and a compatible coolant-fed tool holder are needed to supply cutting fluid through the drill’s internal channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
