M.A. Ford
M.A. Ford Cyclone Drill Aluminum 5X 2 Flute Coolant Fed 630
A coolant-fed drill with two flutes designed for aluminium, model number 630
- Optimised for aluminium with 5x diameter reach
- Two-flute design improves chip evacuation in soft metal
- Internal coolant feed reduces heat at the cutting zone
- M.A. Ford engineering backs consistent hole quality
- California Proposition 65 warning applies to this product
M.A. Ford Cyclone Drill 630 for Aluminum
The M.A. Ford Cyclone Drill 630 is a coolant-fed cutting tool designed for aluminum work. Its 5X diameter flute length and two-flute geometry support deep-hole drilling in non-ferrous materials. The drill is supplied new and ships directly from the manufacturer. This item carries a California Proposition 65 warning for chemicals linked to cancer and reproductive harm.
Machinists drilling deep aluminum holes
The drill suits CNC operators and machinists who need a dedicated 5XD tool for aluminum with through-coolant capability. It is not for buyers who need a drill for steel, titanium or other ferrous alloys. It is not for users without a coolant-fed spindle or tool holder. It is not for applications requiring a shorter 3XD or longer 8XD flute length.
5X diameter coolant-fed flute length
The defining specification is the 5X diameter flute length combined with internal coolant delivery. This reach-and-cooling pairing determines whether the drill can evacuate chips and control heat in deep aluminum holes. If your process demands a different length-to-diameter ratio or external coolant only, this tool will not match the requirement.
Highlights
- Optimised for aluminium with 5x diameter reach
- Two-flute design improves chip evacuation in soft metal
- Internal coolant feed reduces heat at the cutting zone
- M.A. Ford engineering backs consistent hole quality
- California Proposition 65 warning applies to this product
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the CDACRM0630 Cyclone Drill and what is the step people get wrong?
Clamp the shank in a precision collet or hydraulic holder, run true before starting, then engage through-spindle coolant before the first plunge
What maintenance or replacement will the CDACRM0630 Cyclone Drill need later?
The two-flute carbide edges dull after repeated aluminium passes; plan to resharpen or replace the drill once hole quality drops
What limit shows up first on the CDACRM0630 Cyclone Drill under sustained use?
Heat buildup at the cutting zone limits continuous drilling; the through-coolant design delays this but does not eliminate it
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
