M.A. Ford
M.A. Ford CXDSS 1925AP Cyclone Xd 3X Double Margin Drill 19.25mm
19.25 mm solid double-margin drill delivers 3× diameter depth in one pass
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X geometry increases drilling speed
- 25 mm diameter suits precise machining tasks
- M.A. Ford manufacturing ensures reliable performance
- California Proposition 65 warning indicates regulated substances present
Solid Double Margin Drill 19.25 mm
The M.A. Ford CXDSS 1925AP Cyclone Xd is a solid carbide drill designed for 3x diameter drilling depth. It features a double margin design that improves hole straightness and surface finish in demanding materials. This accessory targets professional machinists and maintenance teams requiring precise, repeatable holes.
Suited for high-accuracy 3xD drilling
Machinists needing a rigid, 19.25 mm solid carbide tool for short-hole production will benefit from the double margin geometry. It is not intended for deep-hole applications exceeding 3x diameter or for operations requiring through-coolant channels, which this solid design does not incorporate.
19.25 mm cutting diameter
The 19.25 mm diameter is the critical specification that determines fit for a specific hole size. Verify the required hole tolerance and machine capacity against this exact dimension before purchase. The tool carries a California Proposition 65 warning regarding chemicals known to cause cancer and reproductive harm.
Highlights
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X geometry increases drilling speed
- 25 mm diameter suits precise machining tasks
- M.A. Ford manufacturing ensures reliable performance
- California Proposition 65 warning indicates regulated substances present
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size must my drill chuck accept for the 19.25 mm Cyclone Xd drill?
The drill has a 19.25 mm diameter, so the chuck must open at least that wide to hold the shank securely.
Can I run this double-margin drill in a standard corded drill motor I already own?
Yes, the 19.25 mm Cyclone Xd fits any drill with a chuck large enough for its shank, provided the motor delivers adequate torque for solid-carbide cutting.
How do I confirm the 3X solid double-margin drill is cutting correctly after setup?
Check for a straight, accurately sized 19.25 mm hole with consistent chip evacuation and no excessive vibration or chatter during the cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
