M.A. Ford
M.A. Ford CXDSS 1140AP 11.40 mm drill
11.40 mm solid carbide drill with double margins for precise holemaking
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X geometry enables faster drilling
- 40 mm diameter suits precise metalwork
- New condition ensures full cutting performance
- California Proposition 65 compliance noted for safety
M.A. Ford 11.40 mm Cyclone XD Drill
The M.A. Ford CXDSS 1140AP is a solid carbide drill bit with a 3× diameter flute length and double margin design. It targets machinists and maintenance technicians who need accurate hole placement and improved finish in a single pass. The 11.40 mm cutting diameter suits metric tooling requirements across general engineering workshops.
Suited for 3× depth holes; not for deeper bores
This drill suits jobs requiring a 3× diameter drilling depth with high positional accuracy. The double margins stabilise the tool in materials like steel and cast iron. Buyers needing longer reach beyond 3× diameter or specialised coolant-through capability should look at alternative tooling options.
11.40 mm cutting diameter decides fit
The single specification that determines compatibility is the 11.40 mm cutting diameter. It must match the required hole size and the machine’s chuck or holder capacity. Verify this metric dimension against your drawing or existing tooling before purchase to ensure correct fit.
Highlights
- Solid double-margin design improves hole accuracy
- Cyclone Xd 3X geometry enables faster drilling
- 40 mm diameter suits precise metalwork
- New condition ensures full cutting performance
- California Proposition 65 compliance noted for safety
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 11.40 mm cutting edges need resharpening?
Resharpen when drilling force rises or hole quality drops; the solid carbide construction allows multiple regrinds before replacement.
What limits continuous drilling with this Cyclone XD 3X drill?
Chip evacuation in deep holes becomes the limiting factor once flute capacity is exceeded during sustained operation.
Does the 11.40 mm drill generate excessive heat during all-day use?
The double margin design improves stability and heat distribution, but coolant or peck cycles are still recommended for prolonged runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
