M.A. Ford
M.A. Ford CXDSS 0360AP Cyclone Xd 3.60 mm drill
A 3.60 mm Cyclone Xd drill with 3X solid double-margin design for precise holemaking
- 3X solid construction for rigid drilling performance
- Double margin design improves hole accuracy and finish
- 60 mm diameter suits precise small-hole applications
- Cyclone Xd series built for demanding power-tool use
- California Proposition 65 warning indicates regulated chemical content
3.60 mm solid double-margin drill
The M.A. Ford CXDSS 0360AP Cyclone Xd is a 3.60 mm drill built with a solid double-margin design. It targets machinists and maintenance teams who need accurate hole sizing in steel and alloy workpieces. The tool is supplied new and intended for professional workshop use.
Sustained drilling stability
The double-margin construction supports the drill body continuously during extended cuts, reducing wander and improving roundness when the tool remains engaged. This geometry helps maintain consistent diameter and finish through deeper holes compared with single-margin alternatives. Heat distribution across the margins also resists premature wear during long production runs.
Replaces single-margin drills
Shops moving from conventional single-margin drills gain tighter tolerance control and longer tool life in the same 3.60 mm size. The upgrade is justified when hole quality or batch consistency outweighs the lower upfront cost of standard bits. It does not suit applications requiring coolant-through capability or diameters outside the 3.60 mm specification.
Highlights
- 3X solid construction for rigid drilling performance
- Double margin design improves hole accuracy and finish
- 60 mm diameter suits precise small-hole applications
- Cyclone Xd series built for demanding power-tool use
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 3.60 mm Cyclone Xd drill generate during continuous use?
The drill is a solid carbide cutting tool; heat produced depends on the workpiece material, cutting speed, feed rate and coolant used rather than on the drill itself.
What tool holder or chuck is required to run the 3.60 mm Cyclone Xd drill?
A collet or chuck that accurately grips a 3.60 mm shank is needed; the drill has no integral shank adapter.
Can the 3.60 mm Cyclone Xd drill be used in a machine with a standard 3.60 mm collet?
Yes, the 3.60 mm shank fits any precision collet or chuck sized for 3.60 mm, provided the holder runs true.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
