M.A. Ford
M.A. Ford CXDSS 0350AP Cyclone Xd 3.50 mm drill
3.50 mm solid double-margin drill delivers three-times-diameter depth with improved hole accuracy
- 3X solid construction boosts rigidity during drilling
- double-margin design improves hole accuracy and stability
- Cyclone Xd geometry enhances chip evacuation efficiency
- 50 mm diameter suits precise small-hole applications
- California Prop 65 warning informs safe handling practices
Product Identity
The M.A. Ford CXDSS 0350AP Cyclone Xd is a 3X solid double margin drill with a 3.50 mm diameter. It is designed for machinists and maintenance technicians who need precise holemaking in a range of materials. The tool is supplied new and carries the manufacturer's branding. It is not intended for buyers who require larger diameters or different flute configurations.
Thermals Noise Power
The drill generates heat through friction at the cutting edges during normal operation. Cutting fluid or appropriate lubrication helps manage temperature and reduces wear on the solid double margin design. Noise levels depend on the machine spindle speed and the workpiece material. No electrical power draw figures apply to this unpowered accessory.
Sustained Load Behaviour
Under sustained cutting loads the double margin construction helps maintain hole straightness and surface finish. The 3X geometry supports consistent chip evacuation during deeper drilling cycles. Tool life varies with feed rate, speed and material hardness. The product carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm.
Highlights
- 3X solid construction boosts rigidity during drilling
- double-margin design improves hole accuracy and stability
- Cyclone Xd geometry enhances chip evacuation efficiency
- 50 mm diameter suits precise small-hole applications
- California Prop 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 3.50 mm drill in my drill press and what step is often missed?
Chuck the shank fully and tighten each jaw evenly; the step often missed is verifying zero run-out with a dial indicator before cutting.
What maintenance or replacement will the 3.50 mm Cyclone Xd drill need later?
The solid carbide body cannot be sharpened conventionally; plan to replace the drill once the double margins show wear or hole quality drops.
What limit appears first when drilling continuously with the 3.50 mm bit?
Heat buildup in the workpiece and at the cutting edges becomes the limiting factor before the tool itself fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
