M.A. Ford
M.A. Ford CXDSR1719AP Cyclone Xd 5X Solid Double Margin Drill 11/64 pneumatic accessory
Solid double-margin drill bit cuts 11/64 inch holes with five-times-diameter reach
- Solid double-margin design improves hole accuracy
- Cyclone Xd 5X coating extends tool life
- 11/64 inch diameter suits precision drilling
- New condition ensures full factory performance
- California Proposition 65 warning included for safety compliance
11/64 Cyclone Xd 5X drill for precision holes
The M.A. Ford CXDSR1719AP is a solid double margin drill sized at 11/64 inch. It targets machinists and maintenance teams who need accurate, repeatable holes in metal. The 5X design supports deeper drilling without pecking in many materials. It is sold new and ships directly from the manufacturer.
Heat and power behaviour in daily use
The double margin geometry stabilises the tool in the cut, reducing wandering and the friction that drives heat. Lower cutting forces mean the pneumatic spindle draws less peak power during the cycle. Operators report quieter runs compared with single-margin drills of the same diameter. Consistent chip evacuation keeps temperatures steady through the full depth.
Build quality and day-to-day fit
Solid carbide construction resists chipping on hard alloys and abrasive composites. The 11/64 shank fits standard collets and quick-change holders without adapters. Double margins guide the drill straight, so hole location stays true on fixture plates. California Proposition 65 warnings apply to chemicals in the coating.
Highlights
- Solid double-margin design improves hole accuracy
- Cyclone Xd 5X coating extends tool life
- 11/64 inch diameter suits precision drilling
- New condition ensures full factory performance
- California Proposition 65 warning included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 11/64 Cyclone Xd drill in my pneumatic tool, and which step is most often done wrong?
Insert the shank fully into the chuck or collet, then tighten securely; the step most often missed is confirming the shank seats completely before locking.
What maintenance or replacement will the 11/64 Cyclone Xd drill need later?
Resharpen or replace the drill when the cutting edges dull or the double margins show wear; no other scheduled maintenance is required.
What limit appears first on the 11/64 Cyclone Xd drill under sustained use?
Heat buildup at the cutting edges reduces hardness and dulls the drill before any other limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
